D-Link DES-3010FA страница 226 Скачать руководство пользователя

Страница: 226 / 361

D-Link DES-3010FA/GA/PA CLI Reference Guide

Page 225

snmp-server host

The

snmp-server host

Global Configuration mode command specifies the recipient of Simple Network Manage-

ment Protocol Version 1 or Version 2 notifications. To remove the specified host, use the

form of this command.

Syntax

snmp-server host

{

ip-address

hostname

}

community-string

[

traps | informs

] [

1 | 2

] [

udp-port

port

] [

filter

filter-

name

] [

timeout

seconds

] [

retries

retries

]

no snmp-server host

{

ip-address

hostname

} [

traps | informs

]

Parameters
•

ip-address

— Specifies the IP address of the host (targeted recipient).

•

hostname

— Specifies the name of the host. (Range:1-158 characters)

•

community-string

— Specifies a password-like community string sent with the notification operation.

(Range: 1-20)

•

traps

— Indicates that SNMP traps are sent to this host. If unspecified, SNMPv2 traps are sent to the host.

•

informs

— Indicates that SNMP informs are sent to this host. Not applicable to SNMPv1.

•

— Indicates that SNMPv1 traps will be used.

•

— Indicates that SNMPv2 traps will be used.

•

port

— Specifies the UDP port of the host to use. If unspecified, the default UDP port number is 162.

(Range:1-65535)

•

filtername

— Specifies a string that defines the filter for this host. If unspecified, nothing is filtered.

(Range: 1-30 characters)

•

seconds

— Specifies the number of seconds to wait for an acknowledgment before resending informs. If

unspecified, the default timeout period is 15 seconds. (Range: 1-300)

•

retries — Specifies the maximum number of times to resend an inform request. If unspecified, the default

maximum number of retries is 3. (Range: 0-255)

Default Configuration

This command has no default configuration.

Command Mode

Global Configuration mode

User Guidelines

When configuring an SNMPv1 or SNMPv2 notification recipient, a notification view for that recipient is automati-
cally generated for all the MIB.

When configuring an SNMPv1 notification recipient, the

Inform

option cannot be selected.

If a trap and inform are defined on the same target, and an inform was sent, the trap is not sent.

Example

The following example enables SNMP traps for host 10.1.1.1 with community string "management" using
SNMPv2.

Console(config)#

snmp-server host

10.1.1.1 management 2

Содержание DES-3010FA










































































































































































































































































































































































Результаты поиска

Содержание DES-3010FA

Отзывы:

Похожие инструкции для DES-3010FA

Бренды по названию

Популярные бренды

D-Link DES-3010FA, Руководство CLI

Результаты поиска

Содержание DES-3010FA

Отзывы:

Похожие инструкции для DES-3010FA

Бренды по названию

Популярные бренды