D-Link DES-1005E страница 14 Скачать руководство пользователя

Страница: 14 / 26

ENGLISH

Connecting the Switch

PC to Switch

A computer can be connected to the DES-1005E via a two-pair Category 3, 4, 5 UTP/STP Straight-Through or Crossover cable. A computer

equipped with a RJ-45 10/100Mbps port can be connected to any of the five DES-1005E ports.

The LED indicators for the PC connection depend on the capability of the computer’s Ethernet card. If the LED indicators are not lit after making

a proper connection, check the computer’s Ethernet card, the cable, and the DES-1005E’s conditions and connections.

Hub/Switch to DES-1005E

A hub (10 or 100BASE-TX) can be connected to the DES-1005E via a two-pair Category 3, 4, or 5 UTP/STP Straight Through or Crossover cable. For

100Mbps operation a Category 5 cable must be used. The connection is accomplished from any port of the hub to any port of the DES-1005E.

DES-1005E to Other Devices

The DES-1005E can be connected to another switch or other devices (routers, bridges, etc.) via a two-pair Category 3, 4, 5 UTP/STP

Straight-Through or Crossover cable. A Category 5 (or higher) cable must be used for 100Mbps operation. The connection can be accomplished

from any (MDI-X) port on the DES-1005E to any of the 10Mbps or 100Mbps (MDI-X) ports on another switch or other devices.

Содержание DES-1005E



























Результаты поиска

Содержание DES-1005E

Отзывы:

Похожие инструкции для DES-1005E

Бренды по названию

Популярные бренды

D-Link DES-1005E, Руководство пользователя

Результаты поиска

Содержание DES-1005E

Отзывы:

Похожие инструкции для DES-1005E

Бренды по названию

Популярные бренды