background image

53

D-Link DCS-933L User Manual

Warranty

•  The customer is responsible for all in-bound shipping charges to D-Link. No Cash on Delivery (“COD”) is allowed. Products sent COD will 

be rejected by D-Link. Products shall be fully insured by the customer and shipped to D-Link Networks, Inc., 2525 Meadowvale Boulevard 

Mississauga, Ontario, L5N 5S2 Canada. D-Link will not be held responsible for any packages that are lost in transit to D-Link. The repaired 

or replaced packages will be shipped to the customer via Purolator Canada or any common carrier selected by D-Link. Return shipping 

charges shall be prepaid by D-Link if you use an address in Canada, otherwise we will ship the product to you freight collect. Expedited 

shipping is available upon request and provided shipping charges are prepaid by the customer. D-Link may reject or return any product 

that is not packaged and shipped in strict compliance with the foregoing requirements, or for which an RMA number is not visible from 

the outside of the package. The product owner agrees to pay D-Link’s reasonable handling and return shipping charges for any product 

that is not packaged and shipped in accordance with the foregoing requirements, or that is determined by D-Link not to be defective or 

non-conforming.

•  RMA phone number: 1-800-361-5265 Hours of Operation: Monday-Friday, 9:00AM – 9:00PM EST

What Is Not Covered:

The Limited Warranty provided herein by D-Link does not cover:

Products that, in D-Link’s judgment, have been subjected to abuse, accident, alteration, modification, tampering, negligence, misuse, faulty installation, 

lack of reasonable care, repair or service in any way that is not contemplated in the documentation for the product, or if the model or serial number 

has been altered, tampered with, defaced or removed; Initial installation, installation and removal of the product for repair, and shipping costs; 

Operational adjustments covered in the operating manual for the product, and normal maintenance; Damage that occurs in shipment, due to act 

of God, failures due to power surge, and cosmetic damage; Any hardware, software, firmware or other products or services provided by anyone 

other than D-Link; and Products that have been purchased from inventory clearance or liquidation sales or other sales in which D-Link, the sellers, 

or the liquidators expressly disclaim their warranty obligation pertaining to the product.

While necessary maintenance or repairs on your Product can be performed by any company, we recommend that you use only an Authorized D-Link 

Service Office. Improper or incorrectly performed maintenance or repair voids this Limited Warranty.

Disclaimer of Other Warranties:

EXCEPT FOR THE LIMITED WARRANTY SPECIFIED HEREIN, THE PRODUCT IS PROVIDED “AS-IS” WITHOUT ANY WARRANTY OF ANY KIND WHATSOEVER 

INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. 

Содержание DCS-933L Cloud Camera 1150


























































Отзывы: