26
D-Link DCS-933L User Manual
26
Section 3 - Configuration
Repeater Setup
Check this box to enable Repeater Mode.
This shows the name of the Host wireless network that the camera is
connected to and will extend.
Select an option:
•
Same as Host Wireless Network Name
: Your extended network
will use the same name and settings as your Host network. Your
devices can use the same wireless information to connect to
both the Host and Extended networks.
•
Create a New Wireless Network Name
: This allows you to
manually set the name and security used for the extended
network. You will need to add this information for each wireless
device that connects to this Extended network.
Set the maximum number of clients that are allowed to connect to the
extended network.
If you choose to
Create a New Wireless Network Name
, you can set
your wireless security options here.
Enable
Repeater
Mode:
Host Wireless
Network Name:
Extended
Wireless
Network Name
(SSID):
Maximum
Clients Allowed
to Connect:
Security Mode:
This section allows you to setup and configure the repeater feature of your camera. Repeater Mode allows your camera to
extend the range of your existing wireless network. You can choose to use the same network name and settings as your existing
wireless network, or you can create a new one.
