9
DCS-660 User’s Manual
D-Link Systems, Inc.
Hardware Installation
Hardware Installation
Connect an Ethernet cable
Connect an Ethernet cable to the network cable connector located
on the
DCS-6620’
s back panel and attach it to the network.
Attach the external power supply
Attach the external power supply to the DC power input connector
located on the
DCS-6620
’s back panel labeled
12V
and connect
the other end to your wall outlet.
The PTZ Internet Camera comes with a camera stand and a swivel ball screw
head that can be attached to the PTZ Internet Camera bottom socket cavity.
Attach the camera stand to the PTZ Internet Camera and station it for your
application. There is a hole located in the base of the camera stand allowing the
PTZ Internet Camera to be mounted to the ceiling, or any wall securely.
Attaching the PTZ Internet Camera to the Camera Stand
Power LED
LED
stands for
L
ight-
E
mitting
D
iode.
The Power LED is positioned in the center of the PTZ Internet Camera base. As soon as the power adapter
is connected to the PTZ Internet Camera, the power and the activity LED will flash
red
and
green
several
times. The
DCS-6620
is conducting a self-test. Upon passing the self-test, the
red
LED will be solid and
the
green
LED will start to blink to indicate a good connection to an Ethernet port.
If you are directly
connected to the camera via a crossover cable, the light may cycle on and off and your computer
may show an intermittent loss of connectivity. This is normal until you have configured your PTZ Internet
Camera.
The absence of a blinking
green
LED indicates no connection has been made.
1
2
Содержание DCS-6220
