D-Link DCS-5610, Руководство пользователя

Страница: 32 / 80

D-Link DCS-5610 User Manual
Section - Configuration
LAN Settings:
DHCP:
Static IP Client:
IP Address:
Subnet Mask:
Default Gateway:
Primary DNS:
Secondary DNS:
Enable UPnP
Presentation:
Enable UPnP Port
Forwarding:
PPPoE Settings:
Settings for your local area network.
Select this connection if you have a DHCP server running on your network
and would like a dynamic IP address to be updated to your camera
automatically.
You may obtain a static or fixed IP address and other network information
from your network administrator for your camera. A static IP address will
ease you for accessing your camera in the future.
The fixed IP address.
The default value is “255.255.255.0.” Used to determine if the destination
is in the same subnet.
The gateway used to forward frames to destinations in a different subnet.
Invalid gateway settings may cause the failure of transmissions to a
different subnet.
Primary domain name server that translates names to IP addresses.
Secondary domain name server to backup the primary one.
Allows a user to find, view and control this camera via a presentation page
or “Network Neighborhood” without configuration.
Enables the camera to add the port forwarding entry into the router
automatically when this option is enabled.
Enable this setting if your ISP (DSL service) is using PPPoE. You may
already have both
Username
and
Password
given by your ISP, or you may
check with your ISP. The Connect Status will be determined automatically
by the system.
Network Setup