background image

D-Link DCS-5610 User Manual

Section 1 - Product Overview

• Audio Out

 - Connect

 a speaker to the camera so that a person in front of the camera can hear the person 

on the other end of the communication

.

• Web Configuration

 - Using a Web browser, administrators can configure and manage the PTZ PoE 

Internet Camera directly from its own Web page via the Intranet or the Internet. Up to 20 user names and 
passwords are permitted, with privilege settings controlled by the administrator.

• Powerful Surveillance and Remote Monitoring Utility

 - 

The powerful

 D-ViewCam

 software application 

assigns an administrator with a pre-defined user ID and password who can modify the PTZ PoE Internet 
Camera settings from the remote site via the Intranet or the Internet. Administrators are allowed to monitor 
the image, record the image to a hard drive, take snapshots, and more.

• Connection to External Devices

 - 

Supporting auxiliary Input/Output connectors, you can connect the 

PTZ PoE Internet Camera to a variety of external devices such as IR-sensors, switches and alarm relays. 
Combined with programmable alarming equipment, you can develop a variety of security applications 
that are triggered on alarm-based events. The PTZ PoE Internet Camera provides an industry standard 
in/out external connector for connectivity.

• Internal/External Microphone

 - 

The 

SECURICAM

 Network 

DCS-5610

 allows you to monitor video as well 

as audio through the web browser. You have the option of using the 

DCS-5610

’s integrated microphone or 

your own external microphone using the connection located at the rear of the unit.

Note: 

Use of audio or video equipment for recording the image or voice of a person without their knowledge and consent is prohibited in 

certain states or jurisdictions. Nothing herein represents a warranty or representation that the D-Link product provided herein is suitable 
for the end-user’s intended use under the applicable laws of his or her state. D-Link disclaims any liability whatsoever for any end-user use 
of the D-Link product, which fails to comply with applicable state, local, or federal laws.

Содержание DCS-5610

















































































Отзывы: