46
D-Link DCS-5030L User Manual
46
Section 3 - Configuration
FTP
This section allows you to configure your camera to send snapshots and video clips to an FTP server.
Host Name:
Port:
User Name:
Password:
Path:
Passive Mode:
Enable the
uploading of
images to an
FTP server:
Enter the IP address of the FTP server that you will be connecting
to.
Enter the port of the FTP server that you will be connecting to.
Enter the user name of your FTP server account.
Enter the password of your FTP server account.
Enter the destination path/folder to save files to on the FTP
server.
Enabling passive mode may help you reach your FTP server if
your camera is behind a router protected by a firewall.
Enabling this will allow snapshots to be uploaded in different
ways:
• Choosing
Always
will upload snapshots continuously
based on the
Image Frequency
specified.
• Choosing
Schedule
will allow you to schedule when to
start and stop the uploading of snapshots.
• Select
Motion/Sound Detection
if you would like the
camera to upload images only when motion is detected.
