44
D-Link DCS-5030L User Manual
44
Section 3 - Configuration
Enable the
e-mailing
of images
to an e-mail
account:
Enabling this will allow snapshots to be e-mailed to you in
different ways:
• Choosing
Always
will e-mail snapshots continuously
based on the
E-mail Interval
specified.
• Choosing
Schedule
will allow you to schedule when to
start and stop the e-mailing of snapshots.
• Select
Motion/Sound Detection
if you would like the
camera to e-mail images only when motion or sound is
detected. You can choose whether to e-mail a snapshot
immediately, or e-mail 6 snapshots together, with 3
frames before and after motion/sound was detected. You
can also set the
Frame interval time
to specify how far
apart the snapshots should be.
Step 4
- Enter the destination e-mail address in Receiver
E-mail Address.
Step 5
- Enter the user name required to access the SMTP
server.
Step 6
- Enter the password required to access the SMTP
server.
Step 7
- Select
SSL-TLS
and then click
Save Settings
.
Step 8
- Click the
Test
button to send a test e-mail to the
account listed above.
Note
: You can also use
STARTTLS
, which will use SMTP server
port number
587
.
Note
: If you want to use a Yahoo SMTP server, the SMTP server
address will be different between each registered region, and
only SMTP port
465
is supported
for
SSL-TLS
.
