D-Link DCS-4712E, Быстрое руководство по установке

Страница: 4 / 88

2 Quick Installation Guide
ENGLISH
Cable Interfaces
Figure 3: Cable Interfaces
# Feature Description
1
Ethernet
Jack
RJ-45 connector for Ethernet. Can
also be used to power the camera
using Power over Ethernet (PoE)
2
Power
Connector
Connects to an optional 12 V / 1.5 A
power adapter (not included)
3
Reset
Button
Press and hold for more than five
seconds, then release to perform
a factory reset.
Table 3: Cable Interface Descriptions
DCS-4712E/DCS-4714E Rear Panel
Interfaces
Figure 4: DCS-4712E/DCS-4714E
Rear Panel Interfaces
# Feature Description
1 microSD Slot Slot for a microSD card.
Table 4: DCS-4712E/DCS-4714E Rear
Panel Interface Descriptions
DCS-4718E Bottom Panel Interfaces
Figure 5: DCS-4718E Bottom Panel Interfaces
# Feature Description
1
microSD
Slot
Slot for a microSD card.
Table 5: DCS-4718E Bottom Panel
Interface Descriptions
Management Options
To configure and manage your camera, it
is recommended that you download the
associated Setup Wizard and the D-ViewCam
software suite, both of which are available from
the D-Link website.
Installing the Setup Wizard
1. Open a web browser, navigate to
dlink.com/support/ , and select your
region.
2. On the next screen, enter the model
number of your camera in the search bar
and click
Search . Click the picture of your
camera. On the product page, click the
Download button next to Setup Wizard .
3. Once the executable file has finished
downloading, click it and follow the
instructions to install the Setup Wizard.
1
1
1
2
3