44
D-Link DCS-1201 User Manual
Section 3: Configuration
Add Event
Create and schedule up to 3 events with their own settings here. After making any changes,
click the
Save Settings
button to save your changes.
Event name:
Enable this event:
Priority:
Delay:
Trigger:
Video Motion Detection:
Periodic:
System Boot:
Network Lost:
Tamper Detection:
Enter a name for the event.
Select this box to activate this event.
Set the priority for this event. The event with higher
priority will be executed first.
Specify the delay time before allowing this event to be
triggered again. This is used for both motion detection
events and digital input triggers.
Specify the input type that triggers the event.
Selecting this will trigger the event when motion is
detected during live video monitoring. Make sure you
have enabled motion detection and specified what part
of the image to monitor for motion. For more details,
refer to "Motion Detection" on page 37.
Selecting this will trigger the event in specified intervals.
The trigger interval unit is in minutes.
Selecting this will trigger an event when the system
boots up.
Selecting this will trigger an event when the camera's
connection to the network is lost.
Selecting this will trigger an event when tampering
has been detected. For more details, refer to "Tamper
Detection" on page 38.
