28
D-Link DCS-1201 User Manual
Section 3: Configuration
RTSP Port:
Enable CoS:
Enable QoS:
Enable IPv6:
Enable Multicast for stream:
Enable Bonjour:
Bonjour Name:
Enter the port number to use for RTSP streaming to
mobile devices. The default port number is 554. You may
specify the address of a particular stream. For instance,
live1.sdp can be accessed at rtsp://x.x.x.x/video1.sdp
where the x.x.x.x represents the IP address of your
camera.
Enabling CoS allows you to specify the Class of Service
for different types of traffic so you can prioritize their
transmission on your network. CoS helps provide
prioritization for Layer 2 traffic.
Enabling QoS allows you to specify the Quality of
Service for different types of traffic so you can prioritize
their transmission on your network. QoS helps provide
prioritization for Layer 3 traffic. If the camera is connected
to a router that itself implements QoS, the router's
settings will override the QoS settings of the camera.
Enabling this setting will enable use of the IPv6 protocol.
Click the
IPv6 Information
button to see the camera's
current IPv6 details, or you can check
Manually setup
the IP address
to manually set up the IP address, specify
a default router, and set the primary DNS.
The DCS-1201 allows you to multicast each of the
available streams via a group address and specify the TTL
value for each stream. Enter the ports and TTL settings
you wish to use if you do not want to use the defaults.
Enable this to allow other network devices to connect to
this camera using Bonjour.
Enter a name to use to identify this camera through
Bonjour.
