D-Link DCS-1110 - Network Camera, Руководство пользователя

Страница: 42 / 85

42 D-Link DCS-1110 User Manual
Section 3 - Configuration
The Virtual Server Ports of your router must be opened
for remote access to your camera. This is also referred
to as port forwarding. The D-Link DI-624 is used as an
example to clarify the configuration process. Please
proceed as follows:
• Select
Enabled
to enable virtual server settings.
• Select a camera name.
• Enter your camera’s Local IP Address in the
Private
IP
field. (Example: 192.168.0.100)
• Select TCP under Protocol Type .
• If you are using the default camera port settings, enter
83 in to the
Public
and
Private
Port section.
• Schedule
should be set to
Always
so that the
camera images can be accessed at any time.
• In the
Virtual Servers List
, a check mark appearing before the camera name will indicate that the ports are
enabled.
• Click Apply to save your settings. Note: If you are installing multiple cameras, be sure to open ONE Web port per
additional camera installed: port 81, 82, etc. for Web server. The AV Control Port and AV Streaming Port also need
to be open. These ports are 5000 and 5001. Each camera will also require different control and streaming ports
(5002, 5003,...etc).
3. Assigning and Opening Virtual Server Ports