D-Link DAP-2553 - Wireless N Dual Band Gigabit Access... Скачать руководство пользователя страница 102

Страница: 102 / 104

102

D-Link DAP-2553 User Manual

Appendix E - Warranty

IMPORTANT NOTICE:

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and

operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction

with any other antenna or transmitter.

The availability of some specific channels and/or operational frequency bands are country dependent and are firmware programmed at the factory

to match the intended destination. The firmware setting is not accessible by the end user.

For detailed warranty information applicable to products purchased outside the United States, please contact the corresponding local D-Link

office.

FOR COUNTRY CODE SELECTION USAGE (WLAN DEVICES)

Note: The country code selection is for non-US model only and is not available to all US model. Per FCC regulation, all WiFi product marketed in US

must fixed to US operation channels only.

This unit is to be used with a power adaptor, P/N AMS3-0502500SU or CF1505-B or SA06-20S48-V or F12W3-050200SPAU or F12W3-050200SPAB or

F12W3-050200SPAV or F12W3-050200SPAS or F12W3-050200SPAE or F12W3-050200SPAK or WB-10E05R or 2ABE010B.

Cet appareil doit être utilisé avec un adaptateur secteur, dont le numéro de référence est AMS3-0502500SU ou CF1505-B ou SA06-20S48-V ou

F12W3-050200SPAU ou F12W3-050200SPAB ou F12W3-050200SPAV ou F12W3-050200SPAS ou F12W3-050200SPAE ou F12W3-050200SPAK ou

WB-10E05R ou 2ABE010B.

The PoE (Power over Ethernet) devices that supply or receive power and their connected cables must all be completely indoors or equivalent is

provided in the User’s Guide.

Les périphériques PoE (Power over Ethernet = alimentation électrique par câble Ethernet) qui fournissent ou reçoivent une alimentation et leurs

câbles connectés doivent être complètement à l’intérieur ou l’équivalent est fourni dans le Guide de l’utilisateur.

Содержание DAP-2553 - Wireless N Dual Band Gigabit Access...









































































































Результаты поиска

Содержание DAP-2553 - Wireless N Dual Band Gigabit Access...

Отзывы:

Похожие инструкции для DAP-2553 - Wireless N Dual Band Gigabit Access...

Бренды по названию

Популярные бренды

D-Link DAP-2553 - Wireless N Dual Band Gigabit Access..., Руководство пользователя

Результаты поиска

Содержание DAP-2553 - Wireless N Dual Band Gigabit Access...

Отзывы:

Похожие инструкции для DAP-2553 - Wireless N Dual Band Gigabit Access...

Бренды по названию

Популярные бренды