16
D-Link DAP-1755 User Manual
Section 3 - Configuration
Wireless Setup Wizard
How do I access the web-based configuration utility?
To access the web-based configuration utility, connect to the device’s network
using an Ethernet cable or by using its Wi-Fi Name/SSID and password, then
type the device specific URL into a browser. The device specific URL is written
in the format of http://dlinkap<WXYZ>.local./ where <WXYZ> changes per
the device and is located on the device’s label.
If this is your first time logging in to the extender and no connection has been
established, the setup wizard will automatically appear. If the setup process was
not previously completed, then log in to the interface by leaving the password
field blank.
The setup wizard is designed to guide you through a step-by-step process to configure your new DAP-1755
AC1750 Mesh Wi-Fi Range Extender to extend your wireless network and connect to the Internet via a wireless setup process. To set
your DAP-1755 using an Ethernet cable, please refer to “Access Point Mode Settings” on page 23.
