28
D-Link DAP-1320 User Manual
Section 3 - Web-based Coniguration
Save the system settings onto a ile to the local hard drive.
You will then see a ile dialog where you can select a location
and ile name for the settings.
Load the system settings from a ile on the local hard drive.
Restore the system settings to factory default settings. This
will erase all currently stored settings.
Click
Reboot
to reboot the DAP-1320.
Save Settings
To Local Hard
Drive:
Load Settings
From Local
Hard Drive:
Restore
to Factory
Default
Settings:
Reboot the
Device:
System
This page allows you to save or restore your system coniguration, reset or reboot the DAP-1320. To access this page, click on
the
Management
drop down menu at the top of the page, and select
System
. Click
Save
at any time to save the changes
you have made on this page.