25
D-Link DAP-1320 User Manual
Section 3 - Web-based Coniguration
IPv6 Device Management Interface - You can select an Autoconiguration (dynamic), Static IP, or Link-local IPv6 coniguration:
My IPv6
Connection is:
Obtain DNS
Server Address:
Primary DNS
Server:
Secondary DNS
Server:
Select
Autoconiguration (SLAAC/DHCPv6)
to have the
DAP-1320 automatically receive an IPv6 address from the
uplink router.
You can select to obtain IPv6 DNS server information
automatically, or you can select to conigure DNS servers
manually.
Enter the primary IPv6 DNS server address.
Enter the secondary IPv6 DNS server address. This is optional
but will provide backup if the primary server fails.
My IPv6
Connection is:
IPv6 Address:
Subnet Preix
Length:
Default Gateway:
Primary DNS
Server:
Secondary DNS
Server:
Select
Static IPv6
to manually assign an IP address to the
DAP-1320.
Enter the IPv6 address that you want to assign to the
extended network AP. This address should be outside of the
uplink router’s DHCP address pool.
Enter the length of the IPv6 subnet preix.
Enter the default gateway.
Enter the primary IPv6 DNS server address.
Enter the secondary IPv6 DNS server address. This is optional
but will provide backup if the primary server fails.
