10
D-Link COVR-2202 User Manual
Section 2 - Installation
2. Wait for Covr Point A to boot up. When the COVR LED starts blinking orange, wirelessly connect your PC or laptop to the
Wi-Fi name (SSID) printed on the back of the device, or on the included Wi-Fi Configuration Card.
1. Position the Covr Point labeled
A
close to your Internet-connected modem. Next, connect the power adapter and plug
the Covr Point into a power outlet.
G
Manual Installation
If you do not wish to use the D-Link Wi-Fi app, you can manually set up the COVR-2202 and configure your Covr Wi-Fi network using
the web-based user interface. Follow the instructions below to set up your COVR-2202 AC2200 Tri-Band Whole Home Wi-Fi System.
A
SSID
Wi-Fi
Wi-Fi
Password