D-Link Amplifi DIR-645, Руководство пользователя

Страница: 92 / 139

88 D-Link DIR-645 User Manual
Section 3 - Software Configuration
IPv6 Firewall
On this page the user can configure the IPv6 firewall settings. The firewall settings section is an advance feature that is used to allow or deny traffic
from passing through the device. It works in the same way as IP Filters with additional settings. You can create more detailed rules for the device.
In the
IPv6 Firewall Rules
section the user can create, enable and disable
IPv6 firewall rules used by this device. The following parameters will be
available for configuration:
Configure IPv6
Filtering:
This option defines the behavior of all the IPv6
firewall rules created. Option to choose from are
‘ Turn IPv6 Filtering OFF ’, ‘ Turn IPv6 Filtering ON
and ALLOW rules listed ’, and ‘ Turn IPv6 Filtering
ON and DENY rules listed ’. Select the appropriate
option used here.
Checkbox Tick this option to used the firewall rules created.
Name:
Enter a custom firewall rule name here. This name
is used for identification.
Source Interface: Select the appropriate source interface used here.
Destination
Interface:
Select the appropriate destination interface used
here.
Schedule: Select a time schedule that will be applied to this
rules here.
IP Address
Range:
Enter the IPv6 address range used here.
Protocol: Select the protocol used for this rule here. Options
to choose from are
ALL
,
TCP
,
UDP
, and
ICMP
.
Port Range: Enter the port range used for this rule here.
Click on the
Save Settings
button to accept the changes made.
Click on the Don’t Save Settings button to discard the changes made.