D-Link Amplifi DIR-645 Скачать руководство пользователя страница 42

Страница: 42 / 139

D-Link DIR-645 User Manual

Section 3 - Software Configuration

The following parameters will be available for configuration:

Enable DHCP

Server:

Check this box to enable the DHCP server on your

router. Uncheck to disable this function.

DHCP IP Address

Range:

Enter the starting and ending IP addresses for the

DHCP server’s IP assignment.

DHCP Lease

Time:

The length of time for the IP address lease. Enter

the Lease time in minutes.

Always

Broadcast:

If all the computers on the LAN successfully obtain

their IP addresses from the router’s DHCP server

as expected, this option can remain disabled.

However, if one of the computers on the LAN

fails to obtain an IP address from the router’s

DHCP server, it may have an old DHCP client that

incorrectly turns off the broadcast flag of DHCP

packets. Enabling this option will cause the router

to always broadcast its responses to all clients,

thereby working around the problem, at the cost

of increased broadcast traffic on the LAN.

NetBIOS

announcement:

Check this box to allow the DHCP Server to offer

NetBIOS configuration settings to the LAN hosts.

NetBIOS allow LAN hosts to discover all other

computers within the network, e.g. within Network

Neighborhood.

Learn NetBIOS

from WAN:

If NetBIOS announcement is switched on, it will cause WINS information to be learned from the WAN side, if available. Turn

this setting off to configure manually.

NetBIOS Scope:

This is an advanced setting and is normally left blank. This allows the configuration of a NetBIOS ‘domain’ name under which

network hosts operate. This setting has no effect if the ‘Learn NetBIOS information from WAN’ is activated.

Содержание Amplifi DIR-645












































































































































Результаты поиска

Содержание Amplifi DIR-645

Отзывы:

Бренды по названию

Популярные бренды

D-Link Amplifi DIR-645, Руководство пользователя

Результаты поиска

Содержание Amplifi DIR-645

Отзывы:

Бренды по названию

Популярные бренды