D-Link Amplifi DIR-645 Скачать руководство пользователя страница 7

Страница: 7 / 139

D-Link DIR-645 User Manual

Section 1 - Product Overview

About this Product

Features

This user’s guide provides a wonderful insight into the functionality of the product called the D-Link DIR-645 Wireless Internet

Router. This guide is based on the current running firmware/software version available for this product and might touch on

some new and exciting topics never seen on this product line before providing a rewarding reading experience and in the

end acts as a guide when installing and maintaining this product.

The D-Link DIR-645 wireless router is packed with a load of features. Most of these features are what is expected from an

Internet Wireless router, and then there are the features that are unique to D-Link products.

• Internet Connectivity -

In conjunction with a DSL or Cable Modem, this device can act as the Internet Gateway

to your local network. Connections like, PPPoE, Static and Dynamic IP Connections, PPTP, and L2TP connection

can be made.

• Wireless LAN functionality -

This router supports the full package of what the 802.11n protocol has to offer.

Other remarkable features are WMM, Automatic Fallback, RF Output Level Control, Latest Wireless Security

requirements, WPS and much more.

• Networking -

This router is equipped with 4 LAN ports, running at a speed of 10/100/1000Mbps, and 1 Internet

port, running and the speed of 10/100/1000Mbps. This device can handle a network of up to 1000 MAC addresses.

• Multicasting -

Supports IGMPv2.

• DHCP -

This device supports both Server and Client functionality.

• Quality of Service-

QoS rules can be created to shape traffic based on weight or priority. IP Pools can be managed

based on application port numbers.

Содержание Amplifi DIR-645












































































































































Результаты поиска

Содержание Amplifi DIR-645

Отзывы:

Похожие инструкции для Amplifi DIR-645

Бренды по названию

Популярные бренды

D-Link Amplifi DIR-645, Руководство пользователя

Результаты поиска

Содержание Amplifi DIR-645

Отзывы:

Похожие инструкции для Amplifi DIR-645

Бренды по названию

Популярные бренды