20
Make this selection if you do not wish to use the built-in DHCP feature
in the DSA-3100.
The DSA-3100 allows the gateway to be set to one of three Authentication modes.
Using the Configuration Utility (continued)
Home > Public Network
Select NAT; NAT_IP_PNP or Router
Mode:
continued -
Enter the IP address for the Authentication interface (the Public
Network).
IP Address:
Disable
DHCP
Server:
Enter the subnet mask for the Authentication interface.
Subnet
Mask:
This mode protects the identity of the devices within
the LAN from those devices outside the network.
NAT:
In this mode, the DSA-3100 will not protect the
identity of the connected devices by translating their
IP addresses and shielding them from detection
outside the LAN.
Router:
All devices, regardless of their IP address, can gain
access to the Internet through the DSA-3100 in this
mode.
NAT_IP_PNP:
