D-Link AirPro DWL-AB650 Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 19

D-Link AirPro DWL-AB650 Скачать руководство пользователя страница 15

Note

that if you change the WEP operating mode of the connection

between the AP and your Cardbus Adapter, the WEP keys that you have
entered are saved, but not used. This is indicated by “greying out” the
WEP key entry fields.

Note

if you enter the correct WEP keys, but choose the incorrect WEP

operating mode (that is, clicking the

Network Authentication (Shared

Mode)

for your Cardbus Adapter when the selected AP is set to

Enable

Data encryption

−

or the opposite) the AirPro utility will show that your

Cardbus Adapter is connected to the AP, but no data transfer will occur.
Please ensure that the correct WEP operating mode is selected.

Setting the IP Address

If the Access Point you are connecting to is configured to use the Dynamic
Host Configuration Protocol (DHCP), your Cardbus Adapter will
automatically be assigned an IP address, subnet mask, default gateway
address, and Domain Name Server (DNS) address.

On some networks, the AP will not be configured to use DHCP. These
networks require you to manually enter the IP settings. Clicking on the

IP

Config

button at the bottom left-hand will open the

IP Config

dialog box, as

shown below:

«
...
13
14
15
16
17
...
»

Содержание AirPro DWL-AB650




















Отзывы:

Нет отзывов