35
Check to see if the DWL-G650+ Cardbus adapter is firmly
inserted into the Cardbus slot of your laptop computer.
2. I cannot connect to the access point or the wireless router.
3. The DWL-G650+ Power and Link lights are not on.
4. I forgot my Encryption key.
Make sure that the DWL-G650+ Wireless Adapter is properly seated
in the computer’s Cardbus slot.
If Windows does not detect the hardware upon insertion of the
adapter, make sure to completely remove drivers that were
previously loaded. To remove the drivers, do the following:
Make sure that the SSID on the DWL-G650+ Cardbus adapter is
exactly the same as the SSID on the Access Point or wireless
router.
Move the DWL-G650+ and Access Point or Wireless router into the
same room and then test the wireless connection.
Disable all security settings. (WEP, MAC Address Control, AES)
Make sure that the Radio is not locked down to a different
frequency
Turn off your Access Point and the computer with the DWL-G650+.
Turn on the Access Point, and then turn on the computer with the
DWL-G650+.
Refresh the DWL-G650+ Utility
Troubleshooting
Reset the Access Point to its factory default settings and restore the
DWL-G650+ Wireless Cardbus Adapter to the factory default
settings. (The default settings are listed in the
Using the
Configuration Utility
section in this manual.)
5. The computer does not recognize the DWL-G650+ Wireless Adapter.
