2
2
7
7
Group Interval:
Shows the Group Interval of the device.
View Trap:
The view trap function receives trap events from the
Web-Smart Switch.
There is a light indicator following the
“View Trap”
button. A green
light indicates that the monitor has not received any new traps, while a
red light indicates that there are new traps received by the monitor
available to view. (Figure 8)
Figure 8 – View trap
When the
“View Trap”
button is clicked, a Trap Information window
will pop up, showing the trap information, such as Symbol, Time,
Device IP and the Event occurred. (Figure 9)
The symbol “ ” represents a new trap signal, and will disappear after
the event record is reviewed (clicked).
Figure 9 – Trap information
Note:
To receive Trap information, the switch must be configured
with Trap IP and Trap Events, available from the Trap Setting menu.
Add Item:
Adds a device to the Monitor List manually, by entering
the IP Address of the device to monitor.
Содержание 48-Port 10/100Mbps Web-Smart Switch with 4-Port 10/100/1000Base-T and 2-Port Combo SFP...
Страница 68: ......
