2
2
9
9
Firmware Upgrade:
To update the device firmware, enter the
firmware path and password (if necessary), and click “Start”.).
Figure 12 – Firmware Upgrade
Web Access:
Double click the device in the Monitor List or select a
device in the Monitor List and press the
“Web Access”
button to open
the Web-based Utility. To see the list of web browsers the Web-based
Utility supports, see
Supported web browsers
on page 22.
DHCP Refresh:
select a device in the Monitor List and press the
“
DHCP Refresh
”, and enter the password (if applicable) to trigger
the Web-Smart Switch to request an IP address from a DHCP Server.
Figure 13 – DHCP Refresh
Содержание 48-Port 10/100Mbps Web-Smart Switch with 4-Port 10/100/1000Base-T and 2-Port Combo SFP...
Страница 68: ......