background image

iv

Limited Warranty

Hardware:

D-Link warrants its hardware products to be free from defects in workmanship and materials, under normal use
and service, for the following periods measured from date of purchase from D-Link or its Authorized Reseller:

Product Type

Warranty Period

Complete products

One year

Spare parts and spare kits

90 days

The one-year period of warranty on complete products applies on condition that the product's Registration Card
is filled out and returned to a D-Link office within ninety (90) days of purchase.  A list of D-Link offices is
provided at the back of this manual, together with a copy of the Registration Card.  Failing such timely registra-
tion of purchase, the warranty period shall be limited to 90 days.

If the product proves defective within the applicable warranty period, D-Link will provide repair or replacement
of the product.  D-Link shall have the sole discretion whether to repair or replace, and replacement product may
be new or reconditioned.  Replacement product shall be of equivalent or better specifications, relative to the
defective product, but need not be identical.  Any product or part repaired by D-Link pursuant to this warranty
shall have a warranty period of not less than 90 days, from date of such repair, irrespective of any earlier expi-
ration of original warranty period.  When D-Link provides replacement, then the defective product becomes the
property of D-Link.

Warranty service may be obtained by contacting a D-Link office within the applicable warranty period, and
requesting a Return Material Authorization (RMA) number.  If a Registration Card for the product in question
has not been returned to D-Link, then a proof of purchase (such as a copy of the dated purchase invoice) must
be provided.  If Purchaser's circumstances require special handling of warranty correction, then at the time of
requesting RMA number, Purchaser may also propose special procedure as may be suitable to the case.

After an RMA number is issued, the defective product must be packaged securely in the original or other
suitable shipping package to ensure that it will not be damaged in transit, and the RMA number must be promi-
nently marked on the outside of the package.  The package must be mailed or otherwise shipped to D-Link with
all costs of mailing/shipping/insurance prepaid; D-Link will ordinarily reimburse Purchaser for mail-
ing/shipping/insurance expenses incurred for return of defective product in accordance with this warranty.
D-Link shall never be responsible for any software, firmware, information, or memory data of Purchaser con-
tained in, stored on, or integrated with any product returned to D-Link pursuant to this warranty.

Any package returned to D-Link without an RMA number will be rejected and shipped back to Purchaser at
Purchaser's expense, and D-Link reserves the right in such a case to levy a reasonable handling charge in addi-
tion mailing or shipping costs.

Software:

Warranty service for software products may be obtained by contacting a D-Link office within the applicable
warranty period.  A list of D-Link offices is provided at the back of this manual, together with a copy of the
Registration Card.  If a Registration Card for the product in question has not been returned to a D-Link office,
then a proof of purchase (such as a copy of the dated purchase invoice) must be provided when requesting
warranty service.  The term "purchase" in this software warranty refers to the purchase transaction and resulting
license to use such software.

D-Link warrants that its software products will perform in substantial conformance with the applicable product
documentation provided by D-Link with such software product, for a period of ninety (90) days from the date of
purchase from D-Link or its Authorized Reseller.  D-Link warrants the magnetic media, on which D-Link
provides its software product, against failure during the same warranty period.  This warranty applies to pur-

Содержание 2624ix - Hub - Stackable




















































































































































Отзывы: