D-Industrial Technology Q200, Руководство пользователя, Страница: 41 / 95

PROGRAMMING THE Q200 Q200 User Manual
8-6 200120/Revision 10
SF6 999.9x10-7ml/s
SF6 99.99x10-6ml/s
SF6 9.999x10-5ml/s
The Alarm and Calibration levels will be also displayed with the same format and will
be scaled appropriately to reflect the trace gas concentration that has been set.
8.2.6 RESET PARAMETERS
The sixth parameter in the 'Configure' menu is:
Reset Parameters No
This parameter is used to reset all program mode parameters to their default settings.
Using the
and keys this parameter can be toggled between no and yes.
To clear the program mode parameters select the 'Yes' option and press the
key on
the hand unit. The instrument will display:
Parameters Cleared
This message will be displayed for two seconds, to confirm that the parameters have
been reset to their default settings.
Maximum Value Yes
Minimum Value No
Increment No to Yes
Default Value No
If only one program mode parameter needs resetting then the user should scroll to that
parameter using the appropriate keys, and then press the
key on the console, to
reset it to its default value.
8.2.7 GAS SUPPLY
The seventh parameter in the 'Configure' menu is:
Gas Supply Internal