DU
AL
HEA
TING & COOLING
CONTROLLER
www
.theaquariumsolution.
com
5
OPERATION
Indicator light Status:
ON:
Cooling – the cooling power socket has power applied –
(fan/chiller is switched on.)
FLASHING:
Compressor delay of 3 minutes active (to prevent rapid
cycling.)
OFF:
The cooling power socket has no power – (fan/chiller is switched off.)
ON:
Heating – the heating power socket has power applied –
(heater is switched on.)
OFF:
Heating – the heating power socket has no power applied –
(heater is switched off.)
ON:
Alarm – the measured temperature is above the range set in
the alarm setting – also an audible alarm will sound.
OFF:
Alarm – the measured temperature is within the range set in the
alarm setting.
Setting of parameters is performed in the following sequence:
1.
Target temperature (temperature display will flash)
2.
Cooling Differential value (
will be lit with flashing value)
3.
Heating Differential value (
will be lit with flashing value)
4.
Alarm Differential value (
will be lit with flashing value)
Содержание DUAL HEATING & COOLING CONTROLLER
Страница 1: ...P R O D U C T I N S T R U C T I O N M A N U A L DUAL HEATING COOLING CONTROLLER...
Страница 20: ......
