4
45° Cut
Position the guide bar at 45°. Insert
the floor plank between the cutting
blade and the base, along with the
guide bar as shown, then pull the
handle down to complete a cut.
Lengthwise Cut
Insert the floor plank between the
cutting blade and the working table
along with the guide bar which can
be locked on both sides of the
working table. Keep moving the
plank along with the guide bar after
each cut until the complete plank is
cut.
Diagonal Cut
Position the guide bar at 45°. Insert a
carpet tile between the cutting blade
and the base, along with the guide bar
as shown, then pull the handle down to
complete a cut.
