![background image](http://html1.mh-extra.com/html/d-a-s/h-1500/h-1500_user-manual_3102964015.webp)
Serie H /
H series
Manual del usuario /
User's manual
15
APPENDIX A. Bridge Mode Operation
To operate in bridge mode, follow these steps:
1.
Switch off the amplifier.
2.
Turn volume control potentiometers on the front panel to minimum position (fully anticlockwise).
3.
Connect input signal to channel A.
4.
Set mode switch to
“BRIDGE”.
5.
Connect speakers as follows:
Connect (+) to red speaker terminal on channel A’s output terminals
Connect (-) to red speaker terminal on channel B’s output terminals
6. Turn volume control potentiometers on the front panel to maximum position (fully clockwise).
7. Control volume levels from the mixer or pre-amp only.
NOTE: We do not recommend using bridge mode with loads lower than 4 ohms
Содержание H-1500
Страница 1: ...MANUAL DEL USUARIO USER S GUIDE H series Power Amplifiers H 1500 H 2200 H 4000...
Страница 18: ...Serie H H series Manual del usuario User s manual 18 NOTAS NOTES...
Страница 19: ......