CZEM Drill One Evo, Руководство пользователя

Страница: 7 / 36

7
Switch on the display
To turn on the display, switch the ON/OFF switch to the ON position.
After switching on, the CZEM logo appears on the display and the CAN data on the motorcycle
is initialised.
If proper initialization is not achieved, the display will automatically restart within a few seconds
and attempt to re-establish communication.
If the display still shows only the CZEM logo, please check that:
- the CAN communication cable is correctly tucked in (3-pin female connector, green, yellow
and black wires)
- the fuse cap is correctly positioned
- the remaining wiring is correctly connected
After establishing communication with the controller, the CZEM logo disappears and the display shows
the remaining battery capacity for a few seconds. Then the display switches to the mode of displaying the
values read from the controller.
By default, the display always shows the speed of the motorcycle first. You can change this option and
set the display to show, for example, the engine speed as the first value when switched on.
A description of the change is given in the chapter "Display configuration".