CZEM Drill One Evo, Руководство пользователя

Страница: 6 / 36

6
OLED extended display
OLED display can be selected as an optional extra
with a resolution of 128 x 64 pixels. The display does not have
a backlight as each dot is active.
The advantage of this display is the ability to display additional
data, especially the driving speed or engine speed.
There are also other data available, see Section: "Description of
OLED display functions".
The OLED display reads information via CAN bus directly from the controller located on the battery.
The reading is done with a period of 100 ms, which makes the display of values very fast.
The OLED display kit consists of two components:
1/ OLED display with bracket for mounting under motorcycle handlebars (code RE255070)
2/ Display control unit mounted on the battery next to the motor controller (code 255170)
The connection is shown in the wiring diagram at the end of this document. The control unit has four cable
terminals which are used to connect to the main battery connector (3-pin male connector, red, green and
black wires) , the CAN bus data connector (3-pin female connector, green, yellow and black wires), the ON/OFF
switch connection (2-pin female connector, red and green wires) and the OLED display connection (6-pin
female connector).