CZEM Drill One Evo, Руководство пользователя

Страница: 11 / 36

9 11
Another selectable parameter is the gear ratio. By default, a value of 1.0 is displayed and used.
This means that the speed and distance traveled data sent by the controller to the display are shown as 1:1.
If a different wheel or sprocket size is used, the recalculation of the values sent by the controller can be
adjusted to match reality. For this purpose, a table with individual motorcycle configurations that can be
supplied by CZEM is prepared.
Example: the motorcycle uses a larger wheel than the standard wheel, the speed
therefore does not match reality and the conversion "times 1.1" is needed.
First, we set whole number. Press the button briefly to increase the value by one,
when the value reaches 9 the value 0 is displayed. This allows you to set the
conversion to a smaller value (for example 0.8). Long press the button to confirm
the desired whole number value and move on to the decimal setting. Select the
desired value and confirm by long pressing the button.
The last option for configuration is the default value that will be displayed when the
display is turned on.
Press the button briefly to change the value in the upper right corner and select the default value
displayed when the display is switched on. So if we prefer, for example, to display the battery voltage
instead of the speed, we do not have to switch the display from speed to voltage every time we switch on
the bike, but choose VOLT as the default value.
Save the desired value again by long pressing the display button.
The saving of the set values is confirmed on the screen.