Czar PP-8300, Руководство пользователя

Страница: 50 / 91

Row Refresh Cycle Time (tRFC)
This item allows you to select Minimum Refresh Recovery Time of DDR3.
Options: 107 (Default) / 15 ~ 255
Active to Active Delay (tRRD)
This item allows you to select Row Active to Row Active Delay of DDR3.
Options: 4 (Default) / 4 ~ 15
Write to Read Delay (tWTR)
This item allows you to select Internal Write to Read Command Delay of DDR3.
Options: 5 (Default) / 3 ~ 31
Read CAS# Precharge (tRTP)
This item allows you to select Read to Precharge Delay of DDR3.
Options: 5 (Default) / 4 ~ 15
Four Active Window Delay (tFAW)
This item allows you to select Four Active Window Delay of DDR3.
Options: 20 (Default) / 4 ~ 63
Memory Frequency Limiter
Maximum Memory Frequency Selections in MHz.
Options: Auto (Default) / 1067 / 1333
Max TOLUD
This item sets maximum value of TOLUD. Dynamic assignment would adjust TOLUD automatically
based on largest MMIO length of installed graphic controller.
Options: Dynamic (Default) / 1 GB / 1.25 GB / 1.5 GB / 1.75 GB / 2 GB / 2.25 GB / 2.5 GB / 2.75 GB / 3
GB / 3.25 GB
Memory Scrambler
This item enables or disables memory scrambler support.
Options: Enabled (Default) / Disabled
MRC Fast Boot
This item enables or disables MRC Fast Boot.
Options: Enabled (Default) / Disabled
Scrambler Seed Generation Off
This item sets control memory scrambler seed generation.
Enable – do not generation scrambler seed. Disable – generation scrambler seed always. Options:
Disabled (Default) / Enabled
Memory Remap
This item enables or disables memory remap above 4G.
Options: Enabled (Default) / Disabled
49