1. INTRODUCTION
is a microcontroller board based on the
with Arduino standard IO
headers.
It has 20 digital input/output pins (of which 2 can be used as PWM outputs and 6 as
analog inputs), a 20 MHz crystal oscillator (clock speed up to 48 MHz after
), a mini-B
USB connection, a power jack, standard Arduino IO headers, a PICkit header, a bootloader
switch and a reset button.
CIKU
comes with following features:
●
Power via USB or external DC adapter (7 - 12V).
●
On board 5V 800mA (Max 1A) voltage regulator.
●
On board 3.3V 500mA (Max 500mA) voltage regulator.
●
USB mini-B receptor for USB connection.
●
20 digital I/O pins.
●
6 analog input pin.
●
2 PWM output pin.
●
Standard Arduino UNO R3 header, utilize Arduino shield.
●
Extra pads with standard 0.1” (2.54 mm) pitch to pitch provided.
●
32KByte flash/program memory (~28K after bootloader).
●
PIC18F4550 running at 48MHz clock speed (external 10MHz osci PLL).
●
On board Power, Run and programmable LED.
●
Reset button and bootloader button for entering bootloader mode.
●
Program with MPLAB X IDE and XC8 compiler (library provided).
●
Program loading via USB HID, GUI from Microchip provided.
Created by Cytron Technologies Sdn. Bhd. – All Rights Reserved
3
