x.sight - software manual
20 |
P a g e
To perform an automatic detection of the ROI, press the [
Autodetect ROI
] button below
the video window. Visually confirm the correct detection according to the reference above.
In case the ROI is not centered over the nozzle as shown below, simply click into the video
field to set the ROI manually. Left click into the video window. Your mouse pointer defines
the center of the circles. Aim as follows:
You can also use the zoom function to enlarge the view. To do so, press the [
Roi view
]
button below the Cell Camera window. The camera will now show the area around the
ROI in higher magnification. Click in the window to do corrections if required. To close
the enlarged view, press [
Roi view
] again.
Hint: Whenever you mount a new cartridge to the x.sight, you have to reset the
ROI either automatically or manually. The system does not recognize when a
cartridge is changed.
When pressing the [PLAY] button without having set a ROI initially, the system
will show a respective message and perform the [Autodetect ROI] function
automatically before starting the printing process.
