Cytech KT01, Руководство пользователя

Страница: 28 / 34

KT01 KeyTouch Touchscreen Keypad
24
Summary of Security Application Messages
Security Status Messages (Comfort -> KeyTouch)
Table 3: Security Status Messages
Security Status
Messages Group
Address
(hexadecim
al) KeyTouch
Key
Function Status
System Armed/
Disarmed 80 Status Disarmed=OFF, Armed = On
Exit Delay
Started 81 - ON when exit delay started
Entry Delay
Started 82 - ON when entry delay started
Alarm Status 83 Status Idle, Trouble, Alert = OFF, Alarm state = ON
Tamper 84 Status Tamper = On, No Tamper = OFF
Panic activated 85 Status On when Panic activated
Zone Not Ready 86 Dimmer Ready = OFF, Not ready = Zone number
Zone “unsealed” 86 Replaced by Zone Not Ready function
Zone “sealed” 87 Not implemented
Zone open
circuit 88 Not implemented
Zone short
circuit 89 Not implemented
Zone Isolated 8A Not used for KeyTouch
Battery 8B Status Low = ON, OK = OFF
Battery
Charging 8C Not implemented
Zone Name 8D Not implemented
Status Report 1 8E - Not used for KeyTouch
Status Report 2 8F - Not used for KeyTouch
Password Entry 90 - 1- Valid
2 - Invalid (See Note)
3 - Disabled
4 - re-enabled, not implemented
Mains Failure 91 Status OK = Off, Mains Fail = On
Arm Ready/Not
Ready 92 Dimmer Ready = OFF, Not ready = Zone number
Line Cut 94 Status OK = Off, Cut = On
Arm Fail 95 - Arm Fail =On
Status Report 1 AC -
Status Report 2 AD
Note: The Invalid Password Entry message is received when there is
a wrong sign-in code entered from KeyTouch, or after pressing the
F-key as Comfort expects another key after the F, or if a key is
pressed while another keypad is active.