46
Cytavision installation guide • Safety information
SAfety InformAtIon AnD WArnIng
on tHe proDuct
BEFORE ANY OPERATION IS PERFORMED, PLEASE READ THE OPERATION INSTRUCTIONS AND
PRECAUTIONS CAREFULLY IN ORDER TO MINIMIZE THE POSSIBILITY OF ACCIDENTS
When you use this product you must always respect basic safety measures in order to reduce risk of fire,
electric shock or injury:
•
Install and configure the product in accordance with the user guide.
•
Do not use the product during a lightning storm. There is a remote risk of electric shock from lightning.
Environmental conditions
The product:
•
Must be used and installed indoor with a maximum ambient temperature of 40° C and a minimum temperature of 0°C
•
Must not be placed near any source of heat or direct sunlight.
•
Must be placed in a well-ventilated area in order to prevent overheating. Do not cover or block the air vents on the
product. These are necessary for proper ventilation
•
Must not be in contact with water and moisture
•
Must be installed in a place with a grade 2 of environmental pollution (a place without conducting polluting agents).
Unplug the product from the power outlet (or socket) and any other telecommuni-cation interfaces before cleaning. Use
a damp cloth for cleaning. Do not use liquid or aerosol cleansers.
Do not use this product near water or in close proximity to bath tub, wash bowl, kitchen sink, or laundry basin, in a wet
basement, or near a swimming pool. In case of fire, do not use water for fire-extinguishing. Moving the product from a
cold environment to a hot one may cause moisture on some internal parts of the device. Wait until the product is totally
dry before turning it on.
Any unauthorized modification of the product voids this declaration.
