Cyrus Mono X 200 Signature, Инструкция пользователя

Страница: 6 / 12

Cyrus Mono X 200 Signature & Mono X 300 Signature User Instructions
4
Chain Output
The Chain output f allows more than one Mono X Signature to be
connected to each channel of a pre-Amplifier or decoder.
Note: The Chain output is operational whether phono (RCA) or Balanced
XLR input connection is made to the Mono X Signature.
Bi-Amplification
If your pre-amplifier only has a single set of pre outputs, the Chain facility
can be used to connect additional Mono X Signature amplifiers to each
channel for Bi/Tri-amping. Such a bi-amplified system provides the sonic
benefits of totally separate power amplification for the bass and treble
units of the loudspeakers.
In the bi-amplified system illustration below, a preamplifier is connected
to four Mono X Signature amplifiers - two for the left channel and two for
the right channel. Phono input connections are shown.
Note: The Chain output is operational whether phono (RCA) or Balanced
XLR input connection is made to the Mono X Signature.
CHAIN
RS232
SPEAKER
MADE IN ENGLAND
OUTPUT
INPUT INPUT
MC-BUS
INPUT
CHAIN
RS232
SPEAKER
MADE IN ENGLAND
OUTPUT
INPUT INPUT
MC-BUS
INPUT
CHAIN
RS232
SPEAKER
MADE IN ENGLAND
OUTPUT
INPUT INPUT
MC-BUS
INPUT
CHAIN
RS232
SPEAKER
MADE IN ENGLAND
OUTPUT
INPUT INPUT
MC-BUS
INPUT
USE PSX-R ONLY
HEADPHONE
MADE IN ENGLAND
IN-11 IN-10 IN-9 IN-8 IN-7
IN-1 IN-2 IN-3 IN-4 IN-5 IN-6 ZONE 2
OUT
PRE OUT 1 PRE OUT 2 MC-
BUS
IN
OUT
Right
bass
Right
treble
+
-
-
+
Left
bass
Left
treble
+
-
-
+
Gain Matching
All Cyrus power amplifiers, and all power amplifier stages in Cyrus
integrated amplifiers have the same voltage gain characteristics. This
means that you can use the Mono X Signature in conjunction with any
Cyrus amplifier for bi-amping, etc. without any set-up adjustments being
required.