MB95560H/570H/580H Series MB2146-510-01-E Setup Guide, Doc. # 002-05587 Rev. *A
8
Product Overview
1.3
Handling Precautions
The Starter Kit can be used in connection with its bundled products. To ensure correct use of this
product in a proper environment, observe the following guideline:
Follow the instructions described in each manual for the bundled product to use this product.
1.4
Feature
The MB95560H/570H/580H Series starter kit is the best for a performance and functional evaluation,
and a check of operation before including MB95560H/570H/580H Series in a user's system.
Below, the feature of the BGM debugger for MB95560H/570H/580H Series is shown.
■
Microcomputer operation voltage. It corresponds to +2.4V to +5.5V.
(The maximum and minimum of microcomputer operation voltage and frequency of operation dif-
fers with each MCU. refer to the documents (a data sheet, hardware manual, etc.) of each device
relation for the operation voltage and frequency of MCU of operation.)
■
Compact development environment, a light and small BGM Adaptor.
■
Since a monitor program is performed in exclusive memory space, it does not consume user
memory space.
■
Continuation execution, step execution and break correspondence.
■
It connects with a host computer by the USB interface.
1.5
Hardware Setup
In the hardware setup procedure, you configure and connect the hardware products. This chapter
includes the configuring and connecting procedure for each product in order. Check the contents and
complete the hardware setup.
■
Configuring EV-Board
■
Connection of each product
❐
Connecting BGMA and EV-board
❐
Connecting EV-Board power supply
