Cypress HTCP-255DN, Руководство по эксплуатации, Страница: 7 / 16

44
4.3. Remote Control and functions
1
Power: Press the button once to power
ON the device. Press again to enter
standby mode.
2
Input: Press the button repeatedly to
toggle through various input sources as
follows.
3
HD input: Press the button to select
component input.
4
PC input: Press the button to select PC
input.
5
HDMI/DVI input: Press the button to
select DVI (or HDMI) input.
6
Output resolution Select buttons:
Press any one of the button to directly
select output resolution.
For other output resolutions that are not covered by these buttons
please enter Menu/Output page to select them.
7 MENU: Press the button to bring up OSD main menu page.
8 Exit: Press the button to exit from a sub menu or main menu.
9 Up/Down/Left/Right:
Press the Up/Down button to move the highlight bar to your
desired parameter during the OSD operation.
Press the Left/Right button to increase/decrease the setting value
of a selected parameter.
10
OK (Enter): Press the button to confi rm your selection.
11
Reset: Press the button to reset the unit's fi rmware setting to the
factory default value.
12
Auto Adjust: Press the button to optimize the position of the picture
(picture centering) on the screen.
4
1
2
3
8
11
5
7
9
12
6
10