Cypress HTCP-255DN, Руководство по эксплуатации, Страница: 6 / 16

33
adjust setting value of your selected parameter.
6
Power: Press the button to turn ON or turn OFF (standby) the power
of the unit.
4.2 Rear Panel
PC OUT DVI OUT PC IN DVI IN
DC 5V
1 2 3 4 5
1
Power jack: Connect to the 5V 2.6A DC power adaptor.
2
DVI output: Scaled digital DVI output. Connect this output to the
DVI input or HDMI input of your Digital display.
Note: When input is a HDCP encrypted DVI signal the DVI output is
also HDCP encrypted.
The monitor/display that connected to this output also need to be
HDCP compliant in order to get a nice and clean picture. A non-
HDCP compliant display can only display non-HDCP signal and
picture will become noise when input is a HDCP-encrypted signal.
3
PC/D-Sub out: The connector for scaled analog RGB output.
Connect this output port to the analog PC RGB input of your
monitor, or connect it to the RGBHV input of your HD display using
D-sub to 5 BNC adaptor cable. (not included in the package)
Note: When input is a HDCP encrypted DVI signal this analog
output will be turned off.
4
DVI input: Connects this DVI input connector to the DVI output
connector of your DVI source equipment. The DVI input should be
digital DVI only and should not include analog RGB signal.
The use of DVI-I connector is to ensure both DVI-I and DVI-D male
connector of the DVI cable can fi t into this input connector.
The digital DVI input resolution can range from 480i~1080p, or
VGA~WUXGA.
5
PC input: Connects this PC input connector to the VGA output of
your PC. The acceptable PC resolutions range from VGA~WUXGA.