99
Note (PC):
Available only when PC is selected as input.
To adjust picture quality, Use "+,-" to move the highlight bar to your
desired adjust item, press the Menu/Enter to confi rm your selection.
At this point, the selected parameter will turn red, you can then use +,-
to increase or decrease the value of the parameter.
When adjustment is complete, press "Menu" to leave the parameter.
Move the highlight bar to "Exit", then press Menu/Enter to exit.
Note:
The "H-position" and "V-position" are only available when
component or PC input is selected. Neither are available when the
DVI input is selected.
Picture mode:
There are 4 picture modes for customer to choose from.
User:
Select to adjust to your favorite setting and store it.
Standard:
Standard factory default setting for optimal display in a
normal environment.
Vivid:
High saturation picture for optimal display in a bright room.
Movie:
Picture for comfortable low brightness display in a dark room.
Scale:
select overscan when input source is SD or HD video to ensure
no black band around screen border. Select underscan when input
source is PC signal to ensure full picture content fall within screen
border.
Noise Reduction:
This function only works when input is analog RGB or
component. It will not work for DVI input. There are four steps of
Noise Reduction-Off, Low, Middle High. The Noise Reduction will
remove the noise that results from analog to digital conversion
and digital scaling processing.
H & V position:
To adjust for best horizontal and vertical position of the
picture in the screen.
Содержание HTCP-255DN
Страница 1: ...CP 255DN PC HD to 1080p DVI Scaler Box Operation Manual Operation Manual HTCP 255DN...
Страница 16: ......