CYTVII-B-E-1M-176-CPU Evaluation Board User Guide, Document Number. 002-22883 Rev. *C
4
1.
Introduction
This user guide provides instructions to use the CYTVII-B-E-1M-176-CPU and CYTVII-B-E-176-SO
evaluation boards, collectively referred to as 'CPU board' in this document. This is an evaluation
platform for the CYT2B78CABES Traveo II device. The board can be used standalone for basic vali-
dation or in combination with the CYTVII-B-E-BB Traveo II baseboard (available separately from
Cypress). This document assumes that you will work with the combination (CPU board + base-
board), and provides guidance to use features of the evaluation platform. The Device Port Pin Con-
nections on Baseboard and CPU board schematic used in this document is for CYTVII-B-E-1M-176-
CPU Rev C and Rev 1.0 boards and CYTVII-B-E-176-SO Rev C and Rev 1.0 boards only.
1.1
Precautions and Warnings
The evaluation board must be handled by qualified personnel who are aware of the capabilities of
the boards. You must ensure your own safety arising from electrical hazards and other sources. You
must carefully handle the board, which is a delicate PCB, and ensure that it is not subjected to bend-
ing or other stresses.
The CPU board is shipped with a 12 V DC power adapter. This adapter can be plugged into the AC
mains supply anywhere in the world and is designed to receive 100-240 V AC V @ 50/60 Hz. While
powering the board, you must connect only the power adapter supplied with the evaluation board
and not any other part.
