BLE Indoor Positioning with PSoC
6 MCU with BLE Connectivity
Document No. 002-17647 Rev.**
4
Figure 3. Master Configuration
Scan Parameters
f.
Press the reset switch on the Pioneer Kit to start BLE advertisement if no device is connected or device is in Hibernate
mode (red LED is on). Otherwise, skip this step.
g. Observe the simulated Latitude and Longitude values in the HyperTerminal program.
h. On the CySmart Host Emulation Tool, click
Start Scan
. Your device name (configured as
IPS
) should appear in the
Discovered devices list, as
Figure 4. CySmart Device Discovery and Connection
