Appendix
CY8CKIT-044 PSoC® 4 M-Series Pioneer Kit Guide, Doc. No. 001-96598 Rev. *C
24
7. If the device is already acquired, programming will complete automatically
– the result will appear in the PSoC Creator
status bar at the bottom left side of the screen. If the device is yet to be acquired, the Select Debug Target window will
appear. Select
KitProg/<serial number>
and click the
Port Acquire
button, as shown in
Figure 4-2
.
Figure 4-2. Port Acquire
8. After the device is acquired, it is shown in a tree structure below the
KitProg/<serial number>
. Click the
Connect
button and then
OK
to exit the window and start programming, as shown in
Figure 4-3
.
Figure 4-3. Connect Device From PSoC Creator and Program
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
