CY3280-28XXX Universal CapSense® Controller Development Kit Guide, Spec. # 001-57457 Rev. **
25
Hardware Design Notes
project in a hardware environment while viewing and debugging device activity in a software environ-
ment.
3.2.9
External Power Supply Interface (J5)
The J5 connector is the power supply interface. A DC power supply between 9V and 12V is accept-
able. The power on LED D1 lights up when power is applied.
3.2.10
CY3280-SLM Board Connector (J6)
Figure 3-11. CY3280-SLM Board Connector
The CY3280-28XXX Universal CapSense Controller Board connects with the CY3280-SLM Univer-
sal CapSense Linear Slider Module through the P2 connector. The CY3280-SLM Universal
CapSense Linear Slider Module is used for CapSense demonstration. By default, R66, R67, and R7
are not populated.
Table 3-3
indicates the usage of pins when these two boards are connected.
Table 3-3. Pin Usage
Pin
PSoC Port
Description
1
P0[6]
Connect to Slider9 of CY3280-SLM Board
2
P0[4]
Connect to Slider8 of CY3280-SLM Board
3
P0[2]
Connect to Slider7 of CY3280-SLM Board
4
P0[0]
Connect to AnalogOut of CY3280-SLM Board
5
GND
Ground.
6
GND
Ground.
7
P2[6]
Connect to Slider6 of CY3280-SLM Board
8
P2[4]
Connect to Slider5 of CY3280-SLM Board
9
P2[2]
Connect to Slider4 of CY3280-SLM Board
10
P2[0]
Connect to Slider3 of CY3280-SLM Board
11
P3[2]
Connect to Slider2 of CY3280-SLM Board
[+] Feedback
