© 2009 Cypress Solutions
Complete Manual: CTM-15X Firmware 1.2.0
(Revision 1.0)
54
6BCommand Reference
ioemail n <email address>
Sets the email address that the IO report will
be sent to (if configured for email using iorep).
Up to 8 email addresses may be configured
–
one for each of the 8 IO reports. The default email address
is blank.
n = 1 to 8
IO report number
<email address> = name@domain
email address to which the report will be sent
(leave blank to clear the email address)
The current email address can be queried for all IO reports by using the ioemail command without
parameters.
Note that an email server is required – see
emailsrv
Examples:
cmd ioemail 1 me@…
sets t
he send to email address for IO report #1
cmd ioemail 1
clears the email address for IO report #1
cmd ioemail
returns the email address for all 8 IO reports
A cmd save is required for this command to take effect.
return to list of commands
iolocport n xxxxx
Sets the port number of the local server that the IO report will be sent to. Up to 8 IO reports may be
configured.
n = 1 to 8
IO report number
xxxxx = 0 to 65535
local port number
The current local port configuration for an IO report can be queried by using
iolocport n
where
n
is the
report number.
If n is omitted, all reports will be queried.
Examples:
cmd iolocport 1 5005
report #1 will be sent to local port
5005
cmd iolocport
queries the local port setting of all IO reports
A cmd save is required for this command to take effect.
return to list of commands
iomes