© 2009 Cypress Solutions
Complete Manual: CTM-15X Firmware 1.2.0
(Revision 1.0)
107
6BCommand Reference
snfflush
Flushes and resets store and forward NVRAM.
return to list of commands
snflog n
Used to display the contents of the store and forward log locally thru a serial console, and the status of
the log entries. The log can contain up to 3000 records.
This is a read only command.
n = 1 to 3000
number of store reports to be displayed
The number of stored reports and their status can be queried by entering
snflog
without parameters.
T:t
where
t
is the total number of stored reports
F:f
where
f
is the number of reports forwarded
N:n
where
n
is the number of reports not yet forwarded
Examples:
cmd snflog 100
displays the first 100 SnF log entries
cmd snflog
displays the SnF log status
Note: snflog may erroneously report number of forwarded messages as 1 in cases where number of
forwarded messages is actually 0. When network coverage resumes, all packets will be forwarded.
return to list of commands
spc nnnnnn
This command is used to enter the modem’s CSL (Client Subsidy Lock) as part of the network ac
tivation
commands prior to loading the modem’s 10-digit phone number using the
dir
command.
The 6
-digit lock code is used by the modem’s embedded module to compare against the pre-
loaded 6
-
digit CSL. This number will be provided by the service provider at the time of service activation.
nnnnnn
6
-digit lock code
